Getting Started
[1] Device on/off
Connect to the power source, and press the “
” button to turn on the device.
When the device is on, press the “” button to turn off the device.
[2] Remote Control Pairing
- Place the remote control within 10cm of the device, press “
” and “
” simultaneously, an indicator light will begin flashing as the remote control enters pairing mode. Buttons can be released as soon as flashing begins, and the connection is successful when a “Ding” is heard. - If pairing fails, after 30s repeat the above steps.
[3] Function Description of Remote Control
- Focus adjustment
When the function switch at the bottom of the remote control is moved to the right (Focus), the automatic focus function is enabled. You can adjust the focus by using the ” VOL+/- ” button. When the function switch is moved to the left (VOL), focus adjustment is disabled. You can use the “VOL+/-” button to control the device volume. - Shortcut key
To access the shortcut key function, briefly press the Settings button “
“
[4] Automatic Focus Adjustment/Remote Focus Adjustment
- When the automatic focus adjustment function is enabled, the frame will be adjusted automatically when you turn on the device or move it to another location.
- You can enable automatic focus by using the switch at the bottom of the remote control. Move the switch to the right (Focus) TO that the “VOL+/-” button can be used to adjust the frame.
[5] Automatic keystone correction
- When the automatic keystone correction function is enabled, the frame will be adjusted automatically if you move the device to another location.
- When the automatic obstacle avoidance function is enabled, the frame will automatically avoid obstacles if there are obstacles in the projection area When the automatic screen alignment function is enabled, the frame will automatically match the screen if there is a 16:9 or 16:10 screen in the projection area.
- Press the button on the remote control to enter the “Keystone Correction” page. Select “Auto Keystone Correction” to enable the automatic keystone correction function. Select “Manual Keystone Correction” to adjust the four points and the size of the frame.
[6] Google Assistant
- Talk to Google to control your TV using your voice.
Press the Google Assistant button on your remote to search for movies and shows, get recommendations to match your mood, get answers, control smart home devices, and more.
[7] Bluetooth Speaker
- Use mobile Bluetooth settings to search for “XGIMI Elfin” to pair with the device and play songs.
[8] Chromecast Built-in™
Chromecast
built-in
- Easily cast your favorite movies, music, and more to your TV with Chromecast built-in.
- Simply tap the Cast button from apps you already know and love to stream entertainment from your phone, tablet or laptop to the TV. While you’re streaming, you can keep using your phone for other things- scroll through social media, send a text, and even accept calls.
[9] More Settings
- Set your device and image at any interface by using the Settings button “” on the remote control.
- The various settings are described as follows.
| Brightness and color | Select a brightness mode and adjust the parameters. |
| Image mode | Select different image modes in different scenarios, such as movie, football, office and game, to adjust the image parameters of video or signal source. The low-latency option is available in game mode. |
| Sound effect | Adjusts the frame ratio of a signal source. |
| Focus Calibration | If the auto focus function is not as good as before after long-term use, you can tune the automatic focus adjustment function through “Focus Calibration”. Note: Follow instructions on the screen. |
| Keystone Calibration | If you are not satisfied with the effect of the automatic keystone correction function, you can recalibrate the automatic keystone correction function through “Keystone Calibration”. Note: Follow instructions on the screen. |
| Gyro Calibration | If the automatic keystone correction function is not as good as before after long-term use, you can recalibrate the gyro through “Gyro Calibration” to optimize the effect of automatic keystone correction. Follow instructions on the screen. |
[10] Charging Instruction
- The device should be charged with an official, standardized adaptor.
[11] System Upgrade
- The system can be upgraded only when the device has at least 500/0 battery power or is connected to a power source.
- Online upgrade
The online upgrade can be performed through system settings.
Note: The online upgrade can be made through system settings ““
https://manuals.plus/xgimi/elfin-led-projector-manual#ixzz7rMwDrOB4